Venting Configuration
Hinging shown on size table is standard. 
For optional hinging of units, contact your local supplier. 
Specify optional hinging as viewed from the outside.

• "Unit Dimension" always refers to outside frame to frame dimension. 
• For hinging and combinations other than shown, please contact your Andersen supplier. 
• Dimensions in parentheses are in millimeters. 
• When ordering, be sure to specify color desired, white, Sandtone, or Terratone®. 

Joining of Casement and Awning Units
The similar jamb configuration of Andersen® Casement and Awning windows enable them to be combined together in an almost infinite number of window combinations. Only a few of the combinations are shown here.
Specially-milled jamb fillers, exterior trim strips, and inside mullion/transom casings provide a completely finished look for window combinations.
Casement and awning windows can be joined horizontally to create ribbons, stacked vertically to create columns, or linked in both directions to establish curtain wall effects. Combinations shown on the following pages are designed with the Andersen narrow wood joining system, or Andersen aluminum or steel reinforced joining members available in lengths up to 12' 6".